Velocity 300 Rack-mount Guitar Power Amplifier – Rocktron – Technology for Guitarists

Velocity 300 Rack-mount Guitar Power Amplifier – Rocktron – Technology for Guitarists

800-388-4447

ProductsPreampsRack Effects & TunerControllersAmplificationStomp Boxes>Talk BoxesBoutique SeriesReaction SeriesClassic & Signature SeriesWah & Expression PedalsFloor ProcessorsSpeaker EnclosuresAccessoriesNewsArtistsPatchbaySupportDealers & DistributorsContactStore

Velocity 300
Rocktron has been designing power amplifiers specifically for guitar players since the early 1990’s. The Velocity 300 is the latest in our line of Velocity power amps.

Buy Online

The Velocity 300 provides 150 watts/channel when used in stereo applications or 300 watts mono bridged into a 8 ohm load!The Velocity 300 has a unique “Reactance” circuit that actually replicates the output impedance of tube amplifiers—so you can get the same great sound that a tube amplifier delivers in a reliable solid state design. And, because it is a variable control, you can customize your Velocity 300 to sound like any of your favorite tube amps. Best of all, this feature is available in the mono bridged mode too!In addition, the Velocity 300 has “Definition” controls to give you that little bit of edge you need to bring your playing out in the mix. It also has automatic short circuit protection, which detects problems and shuts down the amplifier before any internal damage can be done.Other Features:115/230 VAC voltage selector switch.An AC power detect circuit, which ensures that the amplifier outputs shut down first when AC is removed. This will guard against any thumps or pops that could otherwise occur, potentially damaging speakers when power is cut to the amplifier.Differential input buffers to eliminate ground loop hum coming from the power amp

See also  Rocktron News: ROCK NOTES

Specifications
Output Power (Unbridged) – 150 watts per channel @ 4 ohms (both channel driven), 75 watts per channel @ 8 ohms (both channels driven), 37.5 watts per channel @ 16ohms (both channels driven)Output Power (Bridged) – 300 watts @ 8 ohms, 170 watts @ 16 ohmsInput Sensitivity – -7.3dBu (0.335V RMS), 4W stereo for rated output at max. gainMaximum Input Level – 23dBu (10.95V RMS), input stage clip pointInput Impedance – 10KWMaximum Input – +20dBuMaximum Gain – 26dBDynamic Range – over 100dBFrequency Response – ±1dB, 20Hz – 20kHzOutput Power (both channels driven @ 1% THD) – 55 watts @ 4Ω, 40 watts @ 8Ω, 28 watts @ 16ΩPower Consumption – 402 watts, 3.5A @ 115VACMaximum Output Level – 35dBu (4W bridged)Maximum Gain – 36dBNoise Floor – -75dBu typical (referenced to 1 watt)Dynamic Range – 95dBDistortion (Typical) – 0.1% THDFrequency Response – 20Hz – 20KHz, +0/-3dBCurrent Consumption – 5 amps @115VAC max. (575 watts)Dimensions – 19″x 1 3/4″ x 9 1/2″, 483mm x 44mm x 241mmWeight – 7.5lbs, 3.40kg

Download Manual

Products

PreampsRack Effects & TunerControllersAmplificationStomp BoxesWah & Expression PedalsFloor ProcessorsSpeaker EnclosuresAccessories

Company

HomeAbout UsNewsArtistsStore

Service

PatchbaySupportDealers & DistributorsContactSitemap

Copyright ©2013 Rocktron – a division of GHS Corporation | 800-388-4447 | info@rocktron.com

Site design by Second Son Solutions.